1.600"-2.200" Measure Height Range Valve Spring Height Micrometer for V8 Engine

Description

Fitments: for 1.600 Inch to 2.100 Inch Valve Springs. Fit most V8 engines
1.600"-2.200" Measure Height Range Valve Spring Height Micrometer for V8 Engine
Fitments:
for 1.600 Inch to 2.100 Inch Valve Springs. Fit most V8 engines
Easy & Convenient to Use:
Install our 4929 Height Micrometer just like a valve spring, then expand the tool until it has seated the valve, locks and retainer.
Precise Reading:
Simulated installation allows ultra precise readings. This tool is read like a micrometer, accurate to .001". Its measuring height range is 1.600 inch-2.200 inch.
Easy to Install:
Step1. Simply install the height micrometer instead of a valve spring.
Step2. Rotate the clearly engraved dial to expand the tool to seat the valve.
Step3. Bind the valve spring coil , then locks and retainer.
Before installing the spring on the cylinder heads, check the installed spring height：
1. Install 1 intake and 1 exhaust valve.
2. Get the correct retainer for the spring and correct locks for the retainer. Pull the retainer tightly against the valve locks while holding the valve assembly steady.
3. Place height micrometer or a snap gauge and a pair of calipers on the valve between the spring seat and the outside step of the retainer and turn the height micrometer counterclockwise to establish valve spring height. After you have measured all the valves, find the shortest height. This will become the spring’s installed height on your heads.
4. Add shims until proper height is obtained on the remaining valves.
5. Take the height micrometer and retainer to valve spring tester and check valve spring load at that height.
IMPORTANT:
Since the retainer is installed in the spring when checking the spring loads, make certain that the thickness of the retainer is not included when calculating the installed height and is accounted for when compressing the spring. The spring load checker will show to be higher with the spring installed at the correct height.
Package Includes:
1 x Valve Spring Height Micrometer.
Item Specifics
UPC
Does not apply
Brand
labwork
Manufacturer Part Number
LAW155178
Warranty
1 Year
Custom Bundle
No
Material
Stainless Steel
Type
Single Valve Spring
Fitment Type
Direct Replacement
Valve Type
Exhaust, Intake
Lifter Type
Hydraulic Roller
Payment
We Accept Paypal Only.
Shipment
Usually we arrange shipping in 3 business day after payment confirmed.
Orders will be shipped out via Carrier USPS or FedEx .
Delivery time :
When you find track information is abnormal or not get goods , please feel free to email contact us first for troubleshooting, Don"t open dispute case immediately Please.
Warrenty & RMA
Warranty for defective items (excluding items damaged and/or misused after receipt).
In order to return an item you must contact us to request a RMA No.
Please returned items in the original packaging, fill in RMA number on package, and PROVIDE us reason for the return, and your eBay ID.
Service & Contact
We hope you have a pleasant shopping experience with us and satisfy 100%.
If there are any item or delivery problems, please email contact us first, BEFORE you leave neutral or negative feedback, or 1,2,3 ratings, so that we can address your concerns. Please give us the opportunity to resolve any problem.
Usually, we response your email in 1 business day.
[ Default Others: This is the contents of your Others. You can add a banner for this Others as header and add text descriptions here. The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. ]
Headlight
Suspension
Window Visors
Shop Category
Store Home
Suspension & Steering
Lighting & Lamps
◈  Fog Lights
◈  Xenon Headlight Ballast
◈  Headlight
◈  Fog Lamps cover
◈  Turn Lights
◈  Brake Lights
◈  Truck Light Strip
◈  Moto Lighting & Lamps
◈  Others
◈  Tail Lights
Carburetor
◈  Lawn Mowers Carburetor
◈  String Trimmers Carburetor
◈  Blower Carburetor
◈  Snow Blower Carburetor
◈  Snowthrower Carburetor
◈  Saw Carburetor
◈  Tractor Carburetor
◈  Motorcycle Carburetor
◈  ATV Carburetor
◈  Automobile Carburetor
◈  Others
◈  Golf Carburetor
◈  Gasket
◈  Rebuild kit
◈  Intake Manifold Boot
Boat
◈  Steering Shaft Pin
◈  Yacht Light
◈  Others
Radiators
Fans & Kits
Auto Valve
◈  Pressure Relief Valve
◈  Air Idle Valve
◈  Transmission Solenoids
◈  Control Valve
◈  Transmission Solenoids Valve
◈  EGR Valve
◈  Selector Valve
◈  Others
Motorcycle Valve
◈  Motorcycle Solenoid Valve
◈  Motorcycle fuel Switch Valve
Module
◈  Headlight Driver Module
◈  Fuel Pump Module
◈  Fan Control Module
◈  Others
Fule Injector
Brakes & Brake Parts
◈  Brake Master Cylinder
◈  Clutch & Clutch Parts
◈  Motorcycle Hand Brake Handle
◈  Motorcycle Brake Cable
◈  Motorcycle Brake Pads
◈  Others
Car Repair Kit
Auto Engine System
◈  Valve Cover & Gasket
◈  Oil Cooler
◈  Engine Timing Cover
◈  Thermostat
◈  Turbine Cover
◈  Machine Oil Can
◈  Automobile Heaters&Accessories
◈  Engine Coolant Recovery Tank
◈  Hydraulic Roller
◈  Glow Plug
◈  Tilt Trim Motor
◈  Engine Rocker Arm Shaft Sleeve
◈  Oil Scale
◈  Coolant Water Inlet Pipe
◈  Others
Auto Ignition System
◈  Car Ignition Coil
◈  Spark Plug Protective Cover
◈  Ignition Switch
◈  Car Ignition
◈  Car Ignition Module
Auto Hub
◈  Locking Hub
◈  Hub Bearing
◈  Wheel Spacers Adapters
◈  Others
Motorcycle Ignition System
◈  Motorcycle Ignition
◈  Motorcycle Ignition Coil
◈  Motorcycle Fuel Switch
◈  Motorcycle Hand Plate
◈  Motorcycle Ignition Switch
◈  Motorcycle Starter Fitting
◈  Motor Electromagnetic Starter
Motorcycle engine system
◈  Piston Cylinder Fittings
◈  Camshaft
◈  Others
Auto Actuator
◈  Air Conditioner Actuator
◈  Door Lock Actuator
◈  Eccentric Shaft Actuator
◈  Hood Catch
◈  AC Blower Motor
◈  Clutch Actuator
◈  Fuel Door Opener Actuator
◈  Others
Auto Motor
◈  Power Window Lift Motor
◈  Transfer Case Gear Motor
◈  Front Running Board Motor
◈  Blower Resistor
◈  Others
Auto Inlet & Outlet System
◈  Air Filter
◈  Intake Exhaust Valves
◈  Throttle Body
◈  Power Brake Booster
◈  Exhaust And Intake Pipes
◈  Turbocharger
◈  Others
Auto Circuit Wiring Harness
◈  Airbag Hairspring
◈  Positive Battery Cable
◈  Sensor Harness
◈  Body Wiring Harness
◈  Gear Shift Control Cable
◈  Battery Terminal
◈  Others
Transmission System
◈  Chain
◈  Shaft
◈  Gear
◈  Tensioner
◈  Belt
◈  Steering Power Hose
◈  Others
Auto Switch
◈  Door Power Window Switch
◈  Neutral Safety Switch
◈  Combination Lever Switch
◈  Others
Motorcycle Control System
◈  Gearbox Shift Line
◈  Rectifier
◈  Relay
◈  Voltage Regulator
◈  Thumb Oiler
◈  Others
Auto Sensor
◈  TPMS Sensor
◈  Mass Air Flow Sensor
◈  Oxygen Sensor
◈  Knock (Detonation) Sensor
◈  Air Pressure Sensor
◈  Throttle Position Sensor (TPS)
◈  Vehicle Speed Sensor
◈  ABS Wheel Speed Sensor
◈  Fuel Pressure Sensor
◈  Crankshaft Position Sensor
◈  Oil Pressure Sensor
◈  Camshaft Position Sensor
◈  Ride Height Sensor
◈  PDC Sensor
◈  MAP Sensor
◈  Exhaust Pressure Sensor
◈  Coolant Temperature Sensor
◈  Acceleration Sensor
◈  Others
Motorcycle Pump
◈  Fuel Pump
◈  Brake Calipers
◈  Others
Auto Interior
◈  Plastic Rivets Fasteners
◈  Trunk Cargo Cover Security Shi
◈  Sunroof Sunshade Corn
◈  Armrest Center Box Cover
◈  Cup Holder
◈  Inside Door Handle
◈  Inner Door Panel Handle
◈  Cigarette Lighter
◈  Storage Box
◈  Air Conditioner Vent
◈  Others
◈  Floor Mats
Exterior Trimming Parts
◈  Roof Rack
◈  Running Boards/Side Steps
◈  Bmuper Grille
◈  Fender Flares
◈  Door Handle
◈  Fuel tank cap
◈  Hinge
◈  Front Bumper
◈  Rear Bumper
◈  Motorcycle Decoration
◈  Others
◈  Windshield Wiper Blades
◈  Window Visors
◈  Auto body trim panel
◈  Front bumper trim
Auto Pump
◈  Fuel Pump
◈  Water Pump
◈  High Pressure Fuel Pump
◈  Air Pump
◈  Power Steering Pump
◈  Clutch Master Cylinder
◈  Oil Pump
◈  Others
Cell phone Parts & Components
Tablet PC Components
Home & Garden
◈  Sports Goods
◈  Yard, Garden & Outdoor Living
Business & Industrial
◈  Industrial Control Module
▷  CNC
♢  Edge finder
♢  Drill Bits
♢  Spring Collet
♢  Boring Bar
♢  Mandrel
♢  Collet Chuck
♢  Pull Stud
♢  Quick Change Tool Post
♢  Drill Chuck
♢  Drill Chuck Arbors
♢  Live center
♢  Vise
♢  Milling Arbor
♢  Reamer
♢  Blocks
▷  Hand Tools
♢  Rivet Gun
♢  Wrenches
♢  Hydraulic Crimper
♢  Balance Level
♢  Drill Bits
♢  Outside Micrometer
♢  Casters
♢  Other
▷  Metalworking Supplies
♢  Metal Cut Off Wheels
♢  Flap Discs
♢  Hose Clamp
♢  Welding Wire
♢  Piston Driver
▷  Generator Accessories
♢  Automatic Voltage Regulator
♢  Generator Carburetor
A/C Compressor & Clutch
◈  A/C Compressor Clutch
◈  A/C Compressor
Other
Hot Item
For 2010-2013 Nissan Rogue Car Front Left Outside Chrome Door Handle Smart Entry
USD 18.28
For 1997-2006 Jeep Wrangler TJ Front Matte Black Gladiator Grill Grille w/Mesh
USD 56.39
For 04-09 Toyota Sienna Acrylic Window Visors 4Pc Set
USD 23.80
For Honda 15815-r70-a01 15845-r70-a01 Cylinder Head Solenoid Gasket VTEC
USD 7.50
100x Car 8mm Dia Hole Plastic Rivets Fastener Auto Fender Bumper Push Pin Clips
USD 5.68
New List Item
Beige Sunroof Sunshade Corn Beige 1K9877307B For VW Sharan TiguanGolf Audi Q5
USD 27.10
labwork F10 Style Front Side Fender Amber LED Marker Lights For BMW 1 3 5 Series
USD 18.99
New Idle Air Control Valve for Chrysler Aspen Dodge Dakota 4.7L 2007 4861552ac
USD 20.79
Driver Passenger Sides Fog Light Lamps w/ H11 Halogen Bulbs For Nissan, Infiniti
USD 22.39
New Vapor Canister Purge Valve for 2007-18 Buick Chevrolet Cadillac GMC 12597567
USD 13.98
1.600"-2.200" Measure Height Range Valve Spring Height Micrometer for V8 Engine
Fitments:
for 1.600 Inch to 2.100 Inch Valve Springs. Fit most V8 engines
Easy & Convenient to Use:
Install our 4929 Height Micrometer just like a valve spring, then expand the tool until it has seated the valve, locks and retainer.
Precise Reading:
Simulated installation allows ultra precise readings. This tool is read like a micrometer, accurate to .001". Its measuring height range is 1.600 inch-2.200 inch.
Easy to Install:
Step1. Simply install the height micrometer instead of a valve spring.
Step2. Rotate the clearly engraved dial to expand the tool to seat the valve.
Step3. Bind the valve spring coil , then locks and retainer.
Before installing the spring on the cylinder heads, check the installed spring height：
1. Install 1 intake and 1 exhaust valve.
2. Get the correct retainer for the spring and correct locks for the retainer. Pull the retainer tightly against the valve locks while holding the valve assembly steady.
3. Place height micrometer or a snap gauge and a pair of calipers on the valve between the spring seat and the outside step of the retainer and turn the height micrometer counterclockwise to establish valve spring height. After you have measured all the valves, find the shortest height. This will become the spring’s installed height on your heads.
4. Add shims until proper height is obtained on the remaining valves.
5. Take the height micrometer and retainer to valve spring tester and check valve spring load at that height.
IMPORTANT:
Since the retainer is installed in the spring when checking the spring loads, make certain that the thickness of the retainer is not included when calculating the installed height and is accounted for when compressing the spring. The spring load checker will show to be higher with the spring installed at the correct height.
Package Includes:
1 x Valve Spring Height Micrometer.
Payment
Shipment
Warrenty & RMA
Service & Contact
We Accept Paypal Only.
Usually we arrange shipping in 3 business day after payment confirmed.
Orders will be shipped out via Carrier USPS or FedEx .
Delivery time :
When you find track information is abnormal or not get goods , please feel free to email contact us first for troubleshooting, Don"t open dispute case immediately Please.
Warranty for defective items (excluding items damaged and/or misused after receipt).
In order to return an item you must contact us to request a RMA No.
Please returned items in the original packaging, fill in RMA number on package, and PROVIDE us reason for the return, and your eBay ID.
We hope you have a pleasant shopping experience with us and satisfy 100%.
If there are any item or delivery problems, please email contact us first, BEFORE you leave neutral or negative feedback, or 1,2,3 ratings, so that we can address your concerns. Please give us the opportunity to resolve any problem.
Usually, we response your email in 1 business day.
[ Default Others: This is the contents of your Others. You can add a banner for this Others as header and add text descriptions here. The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. ]
All rights reserved.